CPE V2804PW 1BiDi-SFF+4GE+WiFi
Описание CPE V2804PW 1BiDi-SFF+4GE+WiFi
| Model | Dimension （L x W x H） |
Power | Power Consumption | Weight（No Power Adapter） |
| V2804PW | 185mm×122mm×33mm | 12V,1A | ≤10W | About 300g |
- Power adapter input：220V AC，50HZ
- System power supply: See the nameplate on the device
- Ambient temperature：-5 ~ +55℃ Ambient humidity：10% ~ 90%(non-condensing)
- Store temperature：-30 ~ +60℃ Store humidity：10% ~ 90%(non-condensing)
- For other technical specifications, see the following table：
Характеристики CPE V2804PW 1BiDi-SFF+4GE+WiFi
| Technical Parameter |
| Parameter Name | Hardware Parameter |
| P2P | |
| Chipset | BCM68380F Series |
| Optical Type | BiDi-SFF 20KM SC/PC SC single-mode/single-fiber, symmetric 1.25Gbps |
| Wavelength | Tx 1310nm, Rx 1490nm/1550nm |
| Optical Power | Tx Power -9 to -2 dBm Rx Sensitivity -22 dBm |
| Interface Type | 4*10/100/1000Mbps Auto adaptive Ethernet interfaces, Full/Half Duplex, RJ45 connector |
| Wireless | Compliant with IEEE802.11b/g/n, 300Mbps, 2T2R 2 internal antennas |
| Indicators | 9, For POWER、LINK、WAN、Lan、WiFi、Pair |
| Parameter Name | Software Parameter |
| P2P | |
| LAN | Support Port rate limiting Support Loop detection |
| VLAN | Support VLAN tag mode Support VLAN transparent mode Support VLAN trunk mode Support VLAN translation mode Support VLAN QinQ mode |
| Multicast | Support IGMPv1/v2/v3 Support IGMP Proxy and MLD Proxy Support IGMP Snooping and MLD Snooping |
| QoS | Support 4 queues Support SP and WRR Support 802.1P Support DSCP |
| L3 | Support IPv4、IPv6 and IPv4/IPv6 dual stack Support DHCP/PPPOE/Statics Support Static route Support NAT Support Bridge, Route ,Route and Bridge mixed mode Support DMZ Support DNS Support ALG Support UPnP Support Virtual Server |
| DHCP | Support DHCP Server |
| Security | Support Firewall Support Mac filter Support ACL Support URL filter |
| Management | Support WEB Support TR069 Support TELNET Support CLI |
